Machine Servicing Options and Pricing

New mounts, re-mounts, stripped thread inserts, adjustments & DIN/Z values, Quiver Killer or Binding Freedom inserts…. we’ve got you covered.

Today’s vast array of technical pin and alpine bindings can be seemingly overwhelming.

Working closely with suppliers and manufacturers ensures we are up to date with all the latest binding tech.

Manufacturer jigs are the go to for mounting but we are as well practiced at using our extensive library of templates for the more obscure makes and models.

We will need your boots when undertaking any binding related work*

  • Not sure if your bindings are functioning correctly or suspect your DIN release values might be incorrect?

    We can check the release function, adjust fit and ensure your DIN release values are correct.

    Protect those knees!

  • No Drilling Required.

    Mount bindings onto rails.

    Adjust for boot.

    Calculate and set DIN.

  • Drilling required.

    Mounting Alpine or Frame Bindings to flat top ski.

    Set up to boot, adjust DIN.

  • Drilling Required.

    Mount binding to flat top ski.

    Adjust to boot.

    Set DIN release.

    In our experience, pin bindings require extra time to correctly set-up and adjust to achieve an effective release.

  • *Subject to sufficient clearance between old holes and new*

    Transferring bindings from one pair to another or remounting on existing skis to accommodate new boot size,

    Remove bindings from skis. Calculate new hole positions. Plug old holes. Drill and mount. Adjust and calculate DIN release values.

  • Drill and fitting of brass insert to replace stripped thread. £10 per insert.

    Bindings re-mounted and checked for correct adjustment and setting.

  • The ideal way to enjoy multiple pairs of skis whilst using just the one pair of bindings. With many technical pin bindings costing upward of £400 per pair, Binding Freedom inserts really do make economical sense. There is also a school of thought suggesting that the inserts, being epoxied into the ski can offer a more robust binding mount into uber lightweight touring skis.

    The inserts are beautifully machined from Stainless and are installed by us using specialist tools and super slow cure epoxy. Your bindings will be mounted to the inserts using machine screws specifically for your particular binding. You can then swap your bindings from ski to ski at will.

    If you are a frequent traveller it can be beneficial to remove your bindings and pop them deep in your hold luggage or in your hand luggage thus preventing baggage handler induced damage.

    We recommend the use of the thread locking compound Vibratite to prevent the machine screws from coming loose. Vibratite can be purchased from us directly in handy pouches.

    Binding Freedom was invented in 2008 and was the original insert. Quiver Killer came about a year later following some shenanigans!

    We choose to fit Binding Freedom as we consider it to be a far better machined component accompanied by second to none tech support on machine screw specifications and better quality installation tooling. The original really is the best!